Well if you just rewrite that bin you will definatly clone your card, I may be
wrong, but I believe anytime you write a bin file it will clone your card.

This guide will show you how to take this "bin" and use it, but keep your card
uncloned. The advantages are that if D*VE does a card specific hit, You will be
sitting pretty.

1) Take your card, give it a kiss, and promise to treat it right.
2) Open exhu1.74, insert card into loader, and click on the chip icon. to read your
current eeprom.
3) Now go to diskette icon and save this eeprom image, Put a name on it like
virgin, or something you will remember after the card #.
4) With eeprom screen still up, screen with all the addresses and codes, click on
eeprom for the pull down menu, click on cam/zkt/keytools, then click on store hu
cam/zkt.
5) There should now be a message in blue stating card number and that zkt is
stored. Now Open bin file that you wish to load.
6) Now you go back under eeprom pull down menu, go to cam/zkt/keytools, click
on patch cam/zkt. You will get a warning that this does not clone the entie card,
just the cam and zkt table, but that is the whole point.
7) Now use the lightning rod icon to write the improved noncloned image to your
card.

*****watch tv*************

Be careful and make sure you feel comfortable with this before you go forward. In
my humble opinion you are much safer out with your own cam id, than one of
thousands with the same specific info.

Dont make yourself a target.

Good Luck